- 최적화 설계로 인해 CSB미끄럼 베어링의 조립 난이도는 볼 베어링과 기타 베어링보다 훨씬 낮습니다.
- 기본적인설비이면 됩니다
- 상온에서 설치하며 특수 설비가 필요 없습니다
- 공차를 정밀하게 조절하여 조립 시간을 대폭 줄였고 조립 원가를 절감하였습니다
The material is with good wear resistance, low friction coefficient, corrosion resistance and high chemical resistance. It is suitable for the applications where the lubricating is hard to or not accessible. The machining requirement of the mating parts is not critical, so this kind of materials are widely used in general industry.
The material is designed specially with thicker PTFE layer for the purpose of being machinable after assembling to improve higher tolerance requirement as well as to absorb the operating noise. It is suitable for the applications with high requirement of wear resistance, dry friction and maintenance free.
The material is with good wear resistance, low friction coefficient,weather resistance and high temperature resistance. It is suitable for the applications where the stable torque requirement must be satisfied by calibration after assembling of the bearings.
The mechanical feature of this material is similar with CSB-50DH.The special additives provide the electrical conductivity of the material to ensure the further coating process of the assembly at customer end. The nominated resistance is less than 1000 Ohm.
The material is designed for the application conditions of high speed and mid-to-high load. The lipophilic fibre improves the hydrodynamic lubrication performance. It is a material with good resistance of cavitation corrosion and fluid corrosion. It is suitable for high PV requirement.