- CSB의 자동 윤활 베어링 기술은 각종 영역에 효과적인 솔루션을 제공하였습니다. 유지 보수가 힘든 공정 환경에서 CSB는 메인터넌스 특성을 발휘하여 기계 사용 과정에서 발생하는 비싼 수리 비용을 절감하였습니다.
- 최적화된 설계로 인해 CSB 미끄럼 베어링의 조립 난이도는 볼 베어링과 기타 베어링보다 훨씬 낮습니다. CSB는 공차를 정밀하게 통제하여 조립 시간을 대폭 줄였으며 조립 원가를 절감하였습니다.
- CSB는 각 업계의 조작 환경과 공정 조건에 부합되는 솔루션을 제공하며 성능을 향상하고 사용 수명을 연장하는데 유리합니다.
The material is with good wear resistance, low friction coefficient, corrosion resistance and high chemical resistance. It is suitable for the applications where the lubricating is hard to or not accessible. The machining requirement of the mating parts is not critical, so this kind of materials are widely used in general industry.
The material is designed specially with thicker PTFE layer for the purpose of being machinable after assembling to improve higher tolerance requirement as well as to absorb the operating noise. It is suitable for the applications with high requirement of wear resistance, dry friction and maintenance free.
The material is with good wear resistance, low friction coefficient,weather resistance and high temperature resistance. It is suitable for the applications where the stable torque requirement must be satisfied by calibration after assembling of the bearings.
The mechanical feature of this material is similar with CSB-50DH.The special additives provide the electrical conductivity of the material to ensure the further coating process of the assembly at customer end. The nominated resistance is less than 1000 Ohm.
The material is designed for the application conditions of high speed and mid-to-high load. The lipophilic fibre improves the hydrodynamic lubrication performance. It is a material with good resistance of cavitation corrosion and fluid corrosion. It is suitable for high PV requirement.
Zhejiang Changsheng Sliding Bearing Co., Ltd.
주소: No.6, Xinda Road,Economic Development Zone, Jiashan, Zhejiang, China